Negotiable
The date of payment from buyers deliver within days
Henan
Long-term effective
2019-07-13 12:59
132
Company Profile
Xuchang Kaijie Abrasive Co., LtdBy certification [File Integrity]
Contact:kaijiemoju(Mr.)
Email:
Telephone:
Phone:
Area:Henan
Address:Henan
Website:http://www.kaijie-abrasive.com/ http://kaijiemoju.szxkdn.com/
Abrasive: Aluminum oxide A Manufactured without addition of ferrous, chlorinated or sulphurous fillers. -Medium-hard, multipurpose tool of hardness P with high cutting performance and long tool life for reduced heat build-up during cutting.
Choose the wheel according to your practical application.
For multipurpose cutting work. Specially designed for hard-to-reach places.
For use on electric and air-powered straight grinders of all output categories. Can be used with mounted arbor on straight grinders.
Available in a range of sizes from 50mm to 75mm.
Frequently asked questions and solution for cutting wheel:
Possible Causes |
Solution |
The cutting wheel consumption fast | |
The hardness level of wheel is low |
Select and adopt the models with high hardness level |
The grinding pressure is too huge |
Decrease the grinding pressure |
The inner bores of cutting disc craze | |
The cutting disc gets stuck in the work piece |
Move forward and backward evenly, and exert pressure along the diametrical direction |
The cutting disc is used to grinding |
Use the grinding disc in grinding process |
The pressure of side direction is too huge |
Avoid the flange plate with the same diameter in inner side and outside |
The diameter of inner side and outside is inconsistent |
Apply the flange plate with the same diameter in inner side and outside |
The edge crazes while the abrasion wheel is cutting | |
The diameter of the flange plate is too small |
Replace the flange plate with large diameter and generally the diameter of flange plate should be required to reach 1/3 of that of the abrasion wheel |
The loading pressure of the flange is so huge that the flange edge of abrasion wheel of deforms |
Adjust the pressure of the flange and abrasion wheel to reasonable level |
It is used with improper force while cutting |
Decrease the load while cutting and reduce the pressure in side direction |
The diameter of the flange plate is too small |
Replace the flange plate with large diameter and generally the diameter of flange plate should be required to reach 1/3 of that of the abrasion wheel |
The fracture of work pieces is burnt severely | |
The hardness level of abrasion wheel is over high |
Adopt the abrasion wheel of low hardness level and high efficiency |
The work rate of the equipment is low |
Replace it with high work rate |
The belt of the cutting machine is loose |
Adjust the tightness of the belt |
The hardness level of abrasion wheel is over high |
Adopt the abrasion wheel of low hardness level and high efficiency |
http://www.kaijie-abrasive.com/